Enterasys Enterasys Matrix DFE-Gold Series Specifications Page 52
- Page / 128
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
General Configuration Command Set
Setting User Accounts and Passwords
2-26 Matrix DFE-Gold Series Configuration Guide
2.2.1.2 set system login
Use this command to create a new user login account, or to disable or enable an existing account.
The Matrix Series device supports up to 16 user accounts, including the admin account, which
cannot be disabled or deleted.
set system login username {super-user | read-write | read-only} {enable |
disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to enable a new user account with the login name “netops” with super user
access privileges:
username Specifies a login name for a new or existing user. This
string can be a maximum of 80 characters, although a
maximum of 16 characters is recommended for proper
viewing in the show system login display.
super-user |
read-write |
read-only
Specifies the access privileges for this user.
enable | disable Enables or disables the user account.
NOTE: The default admin (su) account cannot
be disabled.
Matrix(su)->set system login netops super-user enable
- Enterasys Matrix™ 1
- DFE-Gold Series 1
- ENTERASYS NETWORKS, INC 4
- FIRMWARE LICENSE AGREEMENT 4
- Contents 7
- PORT CONFIGURATION 8
- SNMP CONFIGURATION 9
- SPANNING TREE CONFIGURATION 9
- 802.1Q VLAN CONFIGURATION 9
- IGMP CONFIGURATION 10
- IP CONFIGURATION 11
- SECURITY CONFIGURATION 11
- Contents 12
- Ta bl e s 17
- About This Guide 19
- STRUCTURE OF THIS GUIDE 20
- RELATED DOCUMENTS 21
- DOCUMENT CONVENTIONS 22
- Introduction 23
- Matrix Series CLI Overview 24
- 1.3 DEVICE MANAGEMENT METHODS 25
- 1.4 GETTING HELP 25
- Getting Help 26
- Factory Default Settings 28
- 2.1.3 CLI Command Modes 34
- 2.1.4 Using WebView 35
- • ro for Read-Only access 37
- • rw for Read-Write access 37
- Key Sequence Emacs Command 43
- Key Sequence vi Command 44
- 2.1.7.1 show line-editor 46
- 2.1.7.2 set line-editor 47
- Configuring the Line Editor 48
- 2.2.1.1 show system login 50
- 2.2.1.2 set system login 52
- 2.2.1.3 clear system login 53
- 2.2.1.4 set password 54
- 2.2.1.8 show system lockout 59
- 2.2.1.9 set system lockout 60
- 2.2.2.1 show mgmt-auth-notify 62
- 2.2.2.2 set mgmt-auth-notify 63
- 2.2.3.1 show ip address 69
- 2.2.3.2 set ip address 70
- 2.2.3.3 clear ip address 71
- 2.2.3.5 set ip gratuitous-arp 73
- 2.2.3.7 show system 75
- 2.2.3.8 show system hardware 77
- 2.2.3.12 show time 84
- 2.2.3.13 set time 85
- 2.2.3.14 show summertime 86
- 2.2.3.15 set summertime 87
- 2.2.3.16 set summertime date 88
- Syntax Description 90
- October 02:00 60 91
- 2.2.3.18 clear summertime 92
- 2.2.3.19 set prompt 93
- 2.2.3.20 set cli completion 94
- 2.2.3.21 loop 95
- 2.2.3.22 show banner motd 96
- 2.2.3.23 set banner motd 97
- 2.2.3.24 clear banner motd 98
- 2.2.3.25 show version 99
- • Bp: BootPROM version 100
- 2.2.3.26 set system name 101
- 2.2.3.27 set system location 102
- 2.2.3.28 set system contact 103
- 2.2.3.29 set width 104
- 2.2.3.30 set length 105
- 2.2.3.31 show logout 106
- 2.2.3.32 set logout 107
- 2.2.3.33 show physical alias 108
- 2.2.3.34 set physical alias 110
- 2.2.3.35 clear physical alias 112
- 2.2.3.37 set physical assetid 114
- 2.2.4.1 set license 117
- 2.2.4.2 show license 118
- 2.2.4.3 clear license 119
- Purpose 120
- 2.2.5.1 show inlinepower 122
- 2.2.5.2 set inlinepower mode 124
- 2.2.5.17 set port inlinepower 139
- 2.2.7.1 show boot system 145
- 2.2.7.2 set boot system 146
- 2.2.8.1 show telnet 148
- 2.2.8.2 set telnet 149
- 2.2.8.3 telnet 150
- 2.2.8.4 show router telnet 151
- 2.2.8.5 set router telnet 152
- 2.2.8.6 clear router telnet 153
- 2.2.9.1 dir 156
- Table 2-8 dir Output Details 157
- 2.2.9.2 show file 159
- 2.2.9.3 show config 161
- 2.2.9.4 configure 163
- 2.2.9.5 copy 164
- 2.2.9.6 delete 166
- 2.2.9.7 script 167
- 2.2.10.1 show neighbors 170
- 2.2.10.2 show cdp 171
- 2.2.10.3 set cdp state 173
- 2.2.10.4 set cdp auth 174
- 2.2.10.5 set cdp interval 175
- 2.2.10.6 set cdp hold-time 176
- 2.2.10.7 clear cdp 177
- 2.2.10.8 show ciscodp 178
- 2.2.10.10 set ciscodp status 182
- 2.2.10.11 set ciscodp timer 183
- 2.2.10.13 set ciscodp port 185
- 2.2.10.14 clear ciscodp 188
- 2.2.11.1 show mtu 191
- 2.2.11.2 set mtu 192
- 2.2.11.3 clear mtu 193
- 2.2.12.1 cls (clear screen) 195
- 2.2.12.2 exit 196
- 2.2.13 Resetting the Device 197
- 2.2.13.1 show reset 198
- 2.2.13.2 reset 199
- 2.2.13.3 reset at 200
- 2.2.13.4 reset in 201
- 2.2.13.5 clear config 202
- 2.2.14.1 show support 204
- 2.3.2.1 show router 209
- 2.3.2.2 set router 210
- 2.3.2.3 clear router 211
- 2.3.2.4 router 212
- • Set system 213
- • Save/copy 213
- and the 214
- Port Configuration 217
- Port Configuration Summary 218
- 3.3.1.1 show console 223
- 3.3.1.2 clear console 224
- 3.3.1.3 show console baud 225
- 3.3.1.4 set console baud 226
- 3.3.1.5 clear console baud 227
- 3.3.1.9 show console bits 231
- 3.3.1.10 set console bits 232
- 3.3.1.11 clear console bits 233
- 3.3.1.13 set console stopbits 235
- 3.3.1.15 show console parity 237
- 3.3.1.16 set console parity 238
- 3.3.1.17 clear console parity 239
- 3.3.2 Reviewing Port Status 240
- 3.3.2.1 show port 241
- 3.3.2.2 show port status 242
- 3.3.2.3 show port counters 244
- Reviewing Port Status 247
- 3.3.3.1 set port disable 251
- 3.3.3.2 set port enable 252
- 3.3.3.3 show port alias 253
- 3.3.3.4 set port alias 254
- 3.3.3.5 show forcelinkdown 255
- 3.3.3.6 set forcelinkdown 256
- 3.3.3.7 clear forcelinkdown 257
- 3.3.4.1 show port speed 259
- 3.3.4.2 set port speed 260
- 3.3.4.3 show port duplex 261
- 3.3.4.4 set port duplex 262
- 3.3.5.1 show port jumbo 264
- 3.3.5.2 set port jumbo 265
- 3.3.5.3 clear port jumbo 266
- 3.3.6.1 show port negotiation 268
- 3.3.6.2 set port negotiation 269
- 3.3.6.3 show port mdix 270
- 3.3.6.4 set port mdix 271
- 3.3.6.5 clear port mdix 272
- 3.3.6.6 show port advertise 273
- 3.3.6.7 set port advertise 275
- Command Mode 276
- Read-Write 276
- 3.3.6.8 clear port advertise 277
- 3.3.7 Setting Flow Control 279
- 3.3.7.1 show port flowcontrol 280
- 3.3.7.2 set port flowcontrol 282
- 3.3.8.1 show port trap 284
- 3.3.8.2 set port trap 285
- 3.3.8.3 show linkflap 286
- 3.3.8.5 set linkflap 291
- 3.3.8.6 set linkflap interval 292
- 3.3.8.7 set linkflap action 293
- 3.3.8.8 clear linkflap action 294
- 3.3.8.11 clear linkflap down 297
- 3.3.8.12 clear linkflap 298
- 3.3.9.1 show port broadcast 300
- 3.3.9.2 set port broadcast 302
- 3.3.9.3 clear port broadcast 303
- Overview: Port Mirroring 304
- 3.4.3.1 show port mirroring 305
- 3.4.3.2 set port mirroring 306
- 3.4.3.3 clear port mirroring 307
- 3.5.1 LACP Operation 309
- 3.5.2 LACP Terminology 310
- (Section 3.5.4.13) 311
- 3.5.4.1 show lacp 313
- 3.5.4.2 set lacp 315
- 3.5.4.3 clear lacp state 316
- 3.5.4.4 set lacp asyspri 317
- 3.5.4.5 set lacp aadminkey 318
- 3.5.4.6 clear lacp 319
- 3.5.4.7 set lacp static 320
- Configuring Link Aggregation 321
- 3.5.4.8 clear lacp static 322
- 3.5.4.10 set singleportlag 324
- 3.5.4.11 clear singleportlag 325
- 3.5.4.12 show port lacp 326
- for port fe.1.12: 327
- 3.5.4.13 set port lacp 329
- 3.5.4.14 clear port lacp 332
- SNMP Configuration 341
- 4.1.2 SNMPv3 342
- SNMP Configuration Summary 343
- 4.3.1.1 show snmp engineid 346
- 4.3.1.2 show snmp counters 347
- 4.3.2.1 show snmp user 354
- 4.3.2.2 set snmp user 356
- 4.3.2.3 clear snmp user 357
- 4.3.2.4 show snmp group 358
- 4.3.2.5 set snmp group 360
- 4.3.2.6 clear snmp group 361
- 4.3.2.7 show snmp community 362
- 4.3.2.8 set snmp community 363
- 4.3.2.9 clear snmp community 365
- 4.3.3.1 show snmp access 367
- 4.3.3.2 set snmp access 370
- 4.3.3.3 clear snmp access 372
- 4.3.4.1 show snmp view 374
- 4.3.4.2 show snmp context 376
- 4.3.4.3 set snmp view 377
- 4.3.4.4 clear snmp view 378
- 4.3.5.2 set snmp targetparams 383
- 4.3.6.1 show snmp targetaddr 387
- 4.3.6.2 set snmp targetaddr 389
- 4.3.6.3 clear snmp targetaddr 391
- 4.3.7.1 show snmp notify 393
- 4.3.7.2 set snmp notify 395
- 4.3.7.3 clear snmp notify 396
- About SNMP Notify Filters 397
- 4.3.7.5 set snmp notifyfilter 399
- and associate a target 402
- Spanning Tree Configuration 407
- 5.1.2 Spanning Tree Features 408
- 5.2.1.1 show spantree stats 413
- 5.2.1.2 show spantree version 416
- 5.2.1.3 set spantree version 417
- 5.2.1.5 show spantree stpmode 419
- 5.2.1.6 set spantree stpmode 420
- 5.2.1.12 set spantree msti 426
- 5.2.1.13 clear spantree msti 427
- 5.2.1.14 show spantree mstmap 428
- 5.2.1.15 set spantree mstmap 429
- 5.2.1.30 show spantree hello 445
- 5.2.1.31 set spantree hello 446
- 5.2.1.32 clear spantree hello 447
- 5.2.1.33 show spantree maxage 448
- 5.2.1.34 set spantree maxage 449
- Legacy Path Cost is disabled 457
- Tx hold count = 3 463
- 5.2.1.52 set spantree maxhops 467
- 5.2.1.75 show spantree debug 490
- 5.2.1.76 clear spantree debug 492
- 5.2.2.11 set spantree portpri 505
- Section 5.2.1.28 507
- Section 5.2.1.43 511
- 802.1Q VLAN Configuration 521
- • show vlan (Section 6.3.1.1) 523
- 6.3.1.1 show vlan 524
- 6.3.2.1 set vlan 527
- 6.3.2.2 set vlan name 528
- 6.3.2.3 clear vlan 529
- 6.3.2.4 clear vlan name 530
- 6.3.3.1 show port vlan 533
- 6.3.3.2 set port vlan 534
- 6.3.3.3 clear port vlan 536
- 6.3.3.4 show vlan interface 537
- 6.3.3.5 set vlan interface 538
- 6.3.3.6 clear vlan interface 539
- 6.3.3.9 show port discard 542
- 6.3.3.10 set port discard 543
- 6.3.3.11 clear port discard 544
- 6.3.4.1 show port egress 546
- 6.3.4.2 set vlan egress 547
- 6.3.4.3 clear vlan egress 549
- 1H152-51 554
- 6.3.6.1 show gvrp 556
- 6.3.6.2 show garp timer 558
- 6.3.6.3 set gvrp 560
- 6.3.6.4 clear gvrp 561
- 6.3.6.5 set garp timer 562
- 6.3.6.6 clear garp timer 564
- Configuring Policy Profiles 566
- 7.3.1.1 show policy profile 567
- 7.3.1.2 set policy profile 569
- 7.3.1.3 clear policy profile 571
- 7.3.1.4 show policy invalid 572
- 7.3.2.1 show policy rule 576
- 7.3.2.3 set policy classify 582
- 7.3.2.4 set policy rule 584
- 7.3.2.5 clear policy rule 588
- 7.3.2.7 set policy port 591
- 7.3.3.1 show cos state 600
- 7.3.3.2 set cos state 601
- 7.3.3.3 show cos port-type 602
- 7.3.3.4 show cos unit 605
- 7.3.3.5 show cos port-config 606
- 7.3.3.15 show cos reference 622
- 7.3.3.20 show cos settings 628
- 7.3.3.21 set cos settings 629
- 7.3.3.22 clear cos settings 630
- Configuration 635
- Configuring Port Priority 636
- 8.3.1.1 show port priority 637
- 8.3.1.2 set port priority 638
- 8.3.1.3 clear port priority 639
- • 100Base-T - 4 643
- • 1000Base-T - 4 643
- • 1000Base-X - 8 643
- 8.3.3.1 show port ratelimit 646
- 8.3.3.2 set port ratelimit 648
- 8.3.3.3 clear port ratelimit 650
- IGMP Configuration 651
- IGMP Configuration Summary 652
- 9.4.1.1 show igmp enable 654
- 9.4.1.2 set igmp enable 655
- 9.4.1.3 set igmp disable 656
- 9.4.2 Configuring IGMP 657
- 9.4.2.1 show igmp query 658
- 9.4.2.2 set igmp query-enable 659
- Configuring IGMP 660
- IGMP group table is full 661
- 9.4.2.6 show igmp config 663
- 9.4.2.7 set igmp config 665
- 9.4.2.8 set igmp delete 667
- 9.4.2.9 show igmp groups 668
- 9.4.2.10 show igmp static 669
- 9.4.2.11 set igmp add-static 670
- 9.4.2.13 show igmp protocols 672
- 9.4.2.14 set igmp protocols 673
- 9.4.2.15 clear igmp protocols 674
- 9.4.2.16 show igmp vlan 675
- 9.4.2.17 show igmp reporters 676
- 9.4.2.18 show igmp flow 677
- 9.4.2.19 show igmp counters 678
- Chapter 11 681
- 10.2.1.1 show logging all 683
- 10.2.1.2 show logging server 686
- 10.2.1.3 set logging server 687
- Configuring System Logging 688
- 10.2.1.4 clear logging server 689
- 10.2.1.5 show logging default 690
- 10.2.1.6 set logging default 691
- Table 10-3 693
- Mnemonic Application 697
- 10.2.1.11 show logging local 700
- 10.2.1.12 set logging local 701
- 10.2.1.13 clear logging local 702
- 10.2.1.14 set logging here 703
- 10.2.1.15 clear logging here 704
- 10.2.1.16 show logging buffer 705
- 10.2.2.1 history 707
- 10.2.2.2 show history 708
- 10.2.2.3 set history 709
- 10.2.2.4 show netstat 710
- 10.2.2.5 ping 712
- 10.2.2.6 show users 714
- 10.2.2.7 tell 715
- 10.2.2.8 disconnect 716
- 10.2.3 Configuring SMON 717
- 10.2.3.1 show smon priority 718
- 10.2.3.2 set smon priority 719
- 10.2.3.3 clear smon priority 720
- 10.2.3.4 show smon vlan 721
- 10.2.3.5 set smon vlan 722
- 10.2.3.6 clear smon vlan 723
- 10.2.4 Configuring RMON 724
- Configuring RMON 725
- 10.2.4.1 show rmon stats 728
- 10.2.4.2 set rmon stats 731
- 10.2.4.3 clear rmon stats 732
- 10.2.4.4 show rmon history 733
- 10.2.4.5 set rmon history 735
- 10.2.4.6 clear rmon history 736
- 10.2.4.7 show rmon alarm 737
- 10.2.4.10 clear rmon alarm 742
- 10.2.4.11 show rmon event 743
- SNMP trap, both, or none 744
- 10.2.4.14 clear rmon event 748
- 10.2.4.15 show rmon host 749
- Example 750
- 10.2.4.18 clear rmon host 753
- 10.2.4.19 show rmon topN 754
- 10.2.4.22 clear rmon topN 759
- 10.2.4.23 show rmon matrix 760
- 10.2.4.26 clear rmon matrix 764
- 10.2.4.27 show rmon channel 765
- 10.2.4.28 set rmon channel 766
- “capture all” 767
- 10.2.4.29 clear rmon channel 768
- 10.2.4.30 show rmon filter 769
- 10.2.4.31 set rmon filter 770
- 10.2.4.32 clear rmon filter 772
- 10.2.4.33 show rmon capture 773
- 10.2.4.34 set rmon capture 775
- 10.2.4.35 clear rmon capture 777
- 10.2.5.1 show arp 779
- 10.2.5.2 set arp 780
- 10.2.5.3 clear arp 781
- 10.2.5.4 show rad 782
- 10.2.5.5 set rad 783
- 10.2.5.6 show ip route 784
- 10.2.5.7 traceroute 786
- 10.2.5.8 set ip route 789
- 10.2.5.9 clear ip route 790
- 10.2.5.10 show port mac 791
- 10.2.5.11 show mac 792
- 10.2.5.12 set mac 794
- 10.2.5.13 clear mac 795
- 10.2.5.14 show newaddrtraps 797
- 10.2.5.15 set newaddrtraps 798
- 10.2.5.16 show movedaddrtrap 799
- 10.2.5.17 set movedaddrtrap 800
- 10.2.6.1 show sntp 802
- 10.2.6.2 set sntp client 804
- 10.2.6.3 clear sntp client 805
- 10.2.6.4 set sntp server 806
- 10.2.6.5 clear sntp server 807
- 10.2.6.10 set sntp poll-retry 812
- 10.2.6.14 show timezone 816
- 10.2.6.15 set timezone 817
- 10.2.6.16 clear timezone 818
- 10.2.7.1 show nodealias 820
- 10.2.7.2 show nodealias mac 822
- Configuring Node Aliases 824
- 10.2.7.5 set nodealias 828
- 10.2.7.7 clear nodealias 830
- 10.2.8 Configuring NetFlow 832
- 10.2.8.1 show netflow 833
- 10.2.8.2 set netflow 835
- 10.2.8.3 clear netflow 836
- IP Configuration 837
- IP Configuration Command Set 838
- 11.2.1.1 show interface 840
- 11.2.1.2 interface 842
- 11.2.1.4 show ip interface 844
- 11.2.1.5 ip address 846
- 11.2.1.6 no shutdown 847
- 11.2.2.1 show running-config 849
- 11.2.2.2 write 850
- 11.2.2.3 no ip routing 852
- 11.2.4.1 show ip arp 856
- 11.2.4.2 arp 858
- 11.2.4.3 ip gratuitous-arp 859
- 11.2.4.5 ip proxy-arp 861
- 11.2.4.6 ip mac-address 862
- 11.2.4.7 arp timeout 863
- 11.2.4.8 clear arp-cache 864
- 11.2.5.2 ip forward-protocol 867
- About DHCP/BOOTP Relay 868
- 11.2.5.3 ip helper-address 869
- 11.2.6.1 show ip protocols 872
- 11.2.6.2 show ip traffic 873
- 11.2.6.3 clear ip stats 875
- 11.2.6.4 show ip route 876
- 11.2.6.5 ip route 878
- 11.2.6.6 ip icmp 880
- 11.2.6.7 ping 881
- 11.2.6.8 traceroute 882
- 11.2.7 Configuring PIM 883
- 11.2.7.1 ip pim sparse mode 884
- 11.2.7.2 ip pim bsr-candidate 885
- Configuring PIM 886
- 11.2.7.3 ip pim dr-priority 887
- 11.2.7.4 ip pim rp-address 888
- 11.2.7.5 ip pim rp-candidate 889
- 11.2.7.6 show ip pim bsr 890
- 11.2.7.8 show ip pim neighbor 894
- 11.2.7.9 show ip pim rp 896
- 11.2.7.10 show ip pim rp-hash 898
- 11.2.7.11 show ip mroute 899
- 11.2.7.12 show ip mforward 901
- About LSNAT 902
- Session Persistence 903
- Task Use these commands 905
- NOTE: These commands must be 907
- 11.2.8.2 ip slb ftpctrlport 909
- 11.2.8.3 ip slb serverfarm 910
- 11.2.8.4 real 911
- 11.2.8.5 predictor 912
- 11.2.8.6 sticky 913
- 11.2.8.7 show ip slb reals 914
- 11.2.8.10 maxconns 920
- 11.2.8.11 weight 921
- 11.2.8.13 ip slb vserver 925
- 11.2.8.14 serverfarm 926
- 11.2.8.15 virtual 927
- 11.2.8.17 client 930
- 11.2.8.18 persistence level 931
- 11.2.8.19 allow accessservers 933
- 11.2.8.21 show ip slb conns 936
- 11.2.8.22 show ip slb stats 938
- 11.2.8.23 show ip slb sticky 939
- 11.2.8.24 clear ip slb 940
- 11.2.8.25 show router limits 941
- 11.2.8.26 set router limits 942
- 11.2.8.27 clear router limits 944
- DHCP Overview 945
- Configuring DHCP 945
- DHCP Task List 946
- DHCP Command Modes 946
- 11.2.9.1 ip dhcp server 949
- 11.2.9.2 ip local pool 950
- 11.2.9.3 exclude 951
- 11.2.9.4 ip dhcp ping packets 952
- 11.2.9.5 ip dhcp ping timeout 953
- 11.2.9.6 ip dhcp pool 954
- 11.2.9.7 domain-name 955
- 11.2.9.8 dns-server 956
- 11.2.9.9 netbios-name-server 957
- 11.2.9.10 netbios-node-type 958
- 11.2.9.11 default-router 959
- 11.2.9.12 bootfile 960
- 11.2.9.13 next-server 961
- 11.2.9.14 option 962
- 11.2.9.15 lease 964
- 11.2.9.16 host 965
- 11.2.9.17 client-class 966
- 11.2.9.18 client-identifier 967
- 11.2.9.19 client-name 968
- 11.2.9.20 hardware-address 969
- 12.2.2 Configuring RIP 976
- 12.2.2.1 router rip 978
- 12.2.2.2 network 979
- 12.2.2.3 neighbor 980
- 12.2.2.4 distance 981
- 12.2.2.5 ip rip offset 983
- 12.2.2.6 timers 984
- 12.2.2.7 ip rip send version 985
- About RIP Authentication 987
- 12.2.2.9 key chain 988
- 12.2.2.10 key 989
- 12.2.2.11 key-string 990
- 12.2.2.12 accept-lifetime 991
- 12.2.2.13 send-lifetime 993
- 12.2.2.16 no auto-summary 997
- 12.2.2.19 passive-interface 1000
- 12.2.2.20 receive-interface 1001
- 12.2.2.21 distribute-list 1002
- 12.2.2.22 redistribute 1003
- Configuring RIP 1004
- 12.2.3 Configuring OSPF 1005
- Configuring OSPF 1006
- 12.2.3.1 router ospf 1008
- 12.2.3.2 network 1009
- 12.2.3.3 router id 1010
- 12.2.3.4 ip ospf cost 1011
- 12.2.3.5 ip ospf priority 1012
- 12.2.3.6 timers spf 1013
- 12.2.3.13 distance ospf 1020
- Command Defaults 1021
- 12.2.3.14 area range 1022
- 12.2.3.15 area authentication 1023
- 12.2.3.16 area stub 1024
- 12.2.3.17 area default cost 1025
- 12.2.3.18 area nssa 1026
- 12.2.3.19 area virtual-link 1027
- 12.2.3.20 passive-interface 1029
- 12.2.3.21 redistribute 1030
- 12.2.3.22 database-overflow 1032
- 12.2.3.23 show ip ospf 1034
- Output What It Displays 1038
- Output What It Displays 1041
- 12.2.3.30 debug ip ospf 1048
- 12.2.3.31 rfc1583compatible 1049
- 12.2.4 Configuring DVMRP 1050
- Commands 1050
- 12.2.4.1 ip dvmrp 1051
- 12.2.4.2 ip dvmrp metric 1052
- 12.2.4.3 show ip dvmrp route 1053
- 12.2.5 Configuring IRDP 1055
- 12.2.5.1 ip irdp 1056
- Configuring IRDP 1057
- 12.2.5.4 ip irdp holdtime 1059
- 12.2.5.5 ip irdp preference 1060
- 12.2.5.6 ip irdp address 1061
- 12.2.5.7 no ip irdp multicast 1062
- 12.2.5.8 show ip irdp 1063
- 12.2.6 Configuring VRRP 1064
- 12.2.6.1 router vrrp 1065
- 12.2.6.2 create 1066
- 12.2.6.3 address 1067
- 12.2.6.4 priority 1069
- 12.2.6.5 master-icmp-reply 1070
- 12.2.6.6 advertise-interval 1071
- Configuring VRRP 1072
- 12.2.6.7 critical-ip 1073
- VLAN 1, VRID 1: 1074
- 12.2.6.8 preempt 1075
- 12.2.6.9 preempt-delay 1076
- 12.2.6.10 enable 1078
- 12.2.6.13 show ip vrrp 1081
- Security Configuration 1083
- Overview of Security Methods 1084
- Policy Profile Assignment 1085
- Filter-ID Attribute Formats 1085
- • TACACS+ 1089
- • RADIUS 1089
- 13.3.2 Configuring RADIUS 1090
- 13.3.2.1 show radius 1092
- 13.3.2.2 set radius 1094
- 13.3.2.3 clear radius 1096
- Configuring RADIUS 1097
- • IP address 1099
- 13.3.3 Configuring RFC 3580 1102
- About RFC 3580 1102
- Configuring RFC 3580 1104
- 13.3.4 Configuring TACACS+ 1106
- 13.3.4.1 show tacacs 1107
- 13.3.4.2 set tacacs 1110
- 13.3.4.3 clear tacacs 1112
- 13.3.5.1 show dot1x 1115
- Examples 1116
- 13.3.5.3 set dot1x 1120
- About PWA 1125
- • forward ARP requests 1126
- 13.3.6.1 show pwa 1128
- 13.3.6.2 set pwa 1131
- 13.3.6.3 set pwa hostname 1132
- 13.3.6.4 clear pwa hostname 1133
- 13.3.6.5 show pwa banner 1134
- 13.3.6.6 set pwa banner 1135
- 13.3.6.7 clear pwa banner 1136
- 13.3.6.8 set pwa displaylogo 1137
- 13.3.6.9 set pwa redirecttime 1138
- 13.3.6.10 set pwa ipaddress 1139
- 13.3.6.11 set pwa protocol 1140
- 13.3.6.13 set pwa guestname 1142
- 13.3.6.14 clear pwa guestname 1143
- 13.3.6.16 set pwa gueststatus 1145
- 13.3.6.17 set pwa initialize 1146
- 13.3.6.18 set pwa quietperiod 1147
- 13.3.6.19 set pwa maxrequests 1148
- 13.3.6.20 set pwa portcontrol 1149
- 13.3.6.21 show pwa session 1151
- About CEP Phone Detection 1175
- 13.3.8.1 show cep connections 1177
- 13.3.8.2 show cep detection 1178
- 13.3.8.3 show cep policy 1179
- 13.3.8.4 show cep port 1180
- 13.3.8.5 set cep 1181
- 13.3.8.6 set cep port 1182
- 13.3.8.7 set cep policy 1183
- • Both UDP and TCP 1187
- 13.3.8.13 set cep initialize 1189
- 13.3.8.14 clear cep 1190
- parameters 1191
- 13.3.9.1 show maclock 1193
- 13.3.9.3 set maclock enable 1197
- 13.3.9.4 set maclock disable 1198
- 13.3.9.5 set maclock 1199
- Configuring MAC Locking 1200
- 13.3.9.7 set maclock move 1201
- 13.3.9.9 set maclock static 1203
- 13.3.9.11 set maclock trap 1205
- 13.3.9.12 clear maclock 1206
- About Multiple Authentication 1207
- 13.3.10.1 set multiauth mode 1209
- precedence: 1212
- 13.3.10.5 show multiauth port 1213
- 13.3.10.6 set multiauth port 1214
- 13.3.11.1 show ssh state 1226
- 13.3.11.2 set ssh 1227
- 13.3.11.3 set ssh hostkey 1228
- 13.3.11.4 show router ssh 1229
- 13.3.11.5 set router ssh 1230
- 13.3.11.6 clear router ssh 1231
- 13.3.12.1 show access-lists 1233
- Configuring Access Lists 1234
- ip access-group command 1234
- * Advanced License Required * 1237
- 13.3.12.4 ip access-group 1242
- About Policy-Based Routing 1243
- 13.3.13.1 show route-map 1245
- 13.3.13.2 route-map 1246
- 13.3.13.3 match ip address 1248
- 13.3.13.4 set next hop 1249
- 13.3.13.5 show ip policy 1250
- 13.3.13.6 ip policy route-map 1252
- 13.3.13.7 ip policy priority 1253
- 13.3.13.9 ip policy pinger 1255
- 13.3.14.1 show hostdos 1257
- 13.3.14.2 hostdos 1258
- About FST 1261
- 13.3.15.1 show flowlimit 1263
- 13.3.15.2 set flowlimit 1264
- 13.3.15.3 set flowlimit limit 1265
- • user port 1267
- • server port 1267
- • aggregation port 1267
- • inter-switch link 1267
- • unspecified port 1267
- • interswitch link 1271
- 13.3.15.8 set flowlimit port 1273
- Numerics 1281
Related products and manuals for Network switches Enterasys Enterasys Matrix DFE-Gold Series
(24 pages)© 2020, manymanuals.com. All rights reserved. | 0.616 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals