Enterasys Matrix 7H4385-49 Installation Guide download pdf (Page 42)

Completing the Installation Pin Out Descriptions

3-18 Installation

StarttheCommandLineInterface(CLI)fromthemodule’slocalconsoleportasfollows:

1. Connectaterminaltothelocalconsoleportasdescribedin“ConnectingtoCOMPortfor

LocalManagement”onpage 3 ‐12.Thestartupscreen,Figure 3‐12,displays.

2. Attheloginprompt,enteroneofthefollowing

defaultusernames:

– roforRead‐Onlyaccess,

– rwforRead‐Writeaccess,or

– adminforSuperUseraccess.(ThisaccesslevelallowsRead‐Writeaccesstoallmodifiable

parameters,includinguseraccounts.)

3. PressEnter.

4. ThePasswordpromptdisplays.LeavethisstringblankandpressEnter.Themodule

informationand

MatrixpromptdisplaysasshowninFigure 3‐12.

TheDFEmoduleisnowreadytobeconfigured.ForinformationaboutsettingtheIPaddressand

configuringTelnetsettingsforremoteaccesstoDFEmanagement,refertoChapter3inthe

EnterasysMatrixDFE‐PlatinumSeriesConfigurationGuide.TheCLIcommands

enableyouto

initiallysetupandperformmoreinvolvedmanagementconfigurations.

TheEnterasysMatrixDFE‐PlatinumSeriesConfigurationGuideisavailableonlineat:

http://www.enterasys.com/support/manuals

Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribedin

“GettingHelp”onpage xiii.

Figure 3-12 DFE Startup Screen Example (Matrix N7 Chassis)

login: admin

Password:

M A T R I X N7

Command Line Interface

Enterasys Networks, Inc.

50 Minuteman Rd.

Andover, MA 01810-1008 U.S.A.

Phone: +1 978 684 1000

E-mail: [email protected]

WWW: http://www.enterasys.com

Chassis Serial Number: xxxxxxxxxxxx

Chassis Firmware Revision: xx.xx.xx

Matrix N7(su)->

Enterasys Matrix 7H4385-49 Installation Guide Page 42