Enterasys Matrix 7H4385-49 Installation Guide download pdf (Page 43)

Pin Out Descriptions Completing the Installation

DFE-Platinum Series Hardware Installation Guide 3-19

Completing the Installation of a DFE-Platinum Module in an

Existing System

InanestablishedDFEmodulesystem,

•aDFEmoduleisalreadyestablishedasthemanagementmodule,

•thepasswordshavealreadybeensetforvarioususers,

•thesystemIPaddressisset,and 

•othersystemparametershavebeenset.

WhenyouinstallanewDFEmoduleintoasystemwithanexistingconfigureduser

account,the

currentsystemsettingsinthataccountarealreadyrecognizedbythenewDFEmoduleanditwill

operateaccordingly.

Ifyouneedtochangeanysettings,youcanconnectaterminaltothelocalconsoleportas

describedin“ConnectingtoCOMPortforLocalManagement”onpage 3

‐12toaccesssystem

management,oruseaTelnetconnectiontoaccesstheDFEmodulesystemmanagementas

describedinChapter3oftheEnterasysMatrixDFE‐PlatinumSeriesConfigurationGuide.

Logging in with an Administratively-Configured User Account

Ifthedevice’sdefaultuseraccountsettingshavebeenchanged,proceedasfollows:

1. Attheloginprompt,enteryouradministratively‐assignedusernameandpressEnter.

2. AtthePasswordprompt,enteryourpasswordandpressEnter.

ThenoticeofauthorizationandtheMatrixpromptdisplaysasshownbackinFigure 3 ‐12.

TheDFEmoduleisnowreadytobeconfigured.ForinformationaboutsettingtheIPaddressand

configuringTelnetsettingsforremoteaccesstoDFEmanagement,refertoChapter3inthe

EnterasysMatrixDFE‐PlatinumSeriesConfigurationGuide.TheCLIcommandsenableyouto

initiallysetupandperform

moreinvolvedmanagementconfigurations.

TheEnterasysMatrixDFE‐PlatinumSeriesConfigurationGuideisavailableonlineat:

http://www.enterasys.com/support/manuals

Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribedin

“GettingHelp”onpage xiii.

Note: Users with Read-Write (rw) and Read-Only access can use the set password command to

change their own passwords. Administrators with Super User (su) access can use the set system

any local account password. For information on the set password and set system login commands,

refer to Chapter 3 in the Enterasys Matrix DFE-Platinum Series Configuration Guide

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 65 66

No comments

Enterasys Matrix 7H4385-49 Installation Guide Page 43